Sneak a peak now – Look for Wireless in the menu

Launching Q3 in selected regions – Keep an eye out

Standalone PIR sensors 10m

Product range

Order codeDescription
zc-pir-st-rStandalone PIR sensor 10 m, with inbuilt relay
zc-pir-st-vfStandalone PIR sensor 10 m, with inbuilt volt-free relay
zc-pir-st-1sw-rStandalone PIR sensor 10 m, with inbuilt relay and one switch
zc-pir-st-1sw-vfStandalone PIR sensor 10 m, with inbuilt volt-free relay and one switch


  • PIR motion sensor
  • Light level measurement
  • Programmable via IR remote
  • IP65 weatherproof rating with mounting accessory
  • Switch inputs for switch models
Programmable features (IR)

  • Sensor time-out
  • Lux level, dusk (if under lux level, activate sensor)
  • Lux level, disable (if over lux level, disable sensor)
Programmable features (switch)

  • Switch type ( on / off, absence)
  • Switch actions (enable / disable sensor, enable / disable lux)


Dimensions (mm)


Supply220 – 240 V ~50 Hz
Supply current< 0.1 A
Relay output
(-r models)
120 A / 20 ms inrush current
10 A inductive
6 A resistive
Output voltage rating AC
(-vf models)
10 A resistive
6 A inductive
Output load rating DC
(-vf models)
0 – 25 V 3 A resistive
25 – 240 V 200 mA resistive
SensorsPIR, IR, lux
IR38 kHz
Wiring2.5 mm2 cable (no earth, suits round and tps)
Operating temperature0 to 55°C
MaterialPC (body)
Ingress protectionIP54 (front-face only)
IP65 (with surface or wall mount kit)
(kits sold separately)
Recessed (cut-out min Ø83 mm)
Wall mount kit (mounting centres 85 mm)
Surface mount kit
Rod mount kit
Conduit mount kit (mounting centres 50 – 60 mm)
Compliance standardsIEC 61347-2-11
IEC 60669-2-1
EN 55015

Detection pattern

Range10 m (mounted at 2.7 m)
Mounting height2 – 12 m

Accessories range

Order codeDescription
zc-smart-wall-kitSmart sensor wall mount kit
zc-smart-sm-kitSmart sensor surface mount kit, suitable for surface, rod and conduit mounting
zc-rodmount-whtRod mount kit, white, to be used with Smart sensor surface mount kit
n /aConduit mount, not supplied by zencontrol, used with Smart sensor surface mount kit
zc-ir-ctrl-comHand-held infrared control and commissioning unit