Standalone smart PIR sensors 8m

  • Standalone smart PIR sensors 8m
  • Standalone smart PIR sensors 8m
  • Standalone smart PIR sensors 8m
  • Standalone smart PIR sensors 8m
  • Standalone smart PIR sensors 8m
  • Standalone smart PIR sensors 8m

Product range

Order code Description
zc-pir-st-da Standalone smart PIR sensor, 8 m
zc-pir-st-da-r Standalone smart PIR sensor, 8 m, with inbuilt relay
zc-pir-st-da-vf Standalone smart PIR sensor, 8 m, with  inbuilt volt-free relay
zc-pir-st-da-2sw-r Standalone smart PIR sensor, 8 m, with inbuilt relay and two switches
zc-pir-st-da-2sw-vf Standalone smart PIR sensor, 8 m, with inbuilt volt-free relay and two switches

Features

  • PIR motion sensor
  • Light level measurement
  • Full control of DALI lighting
  • Programmable via IR remote
  • Inbuilt IEC62386-101 power supply, 35 mA
  • Inbuilt IEC62386-103 application controller
  • IP65 weatherproof rating with mounting accessory
  • Connect multiple sensors together (max 5)
Programmable features (IR)
  • Sensor time-out
  • Corridor mode
  • Daylight harvesting
  • Lux level, dusk (if under lux level, activate sensor)
  • Lux level, disable (if over lux level, disable sensor)
Programmable features (switch)
  • Switch type (dimmer, on / off, up / down, colour dimmer, colour warmer, colour cooler)
  • Switch actions (enable / disable sensor, enable / disable lux)
  • Switch override time

Resources

Dimensions (mm)

Alt Text

Specifications

Supply 220 – 240 V AC
Supply current < 0.1 A
DALI power supply 35 mA 16V (inbuilt)
Relay output
(-r models)
165 A / 20 ms inrush current
492 A / 1.5 ms LED inrush current
10 A capacitive
10 A inductive
10 A resistive
Volt-free output
(-vf models)
0 – 250 VAC / 10 A
0 – 240 VDC / 10 A
Lens Fresnel
Sensors PIR, IR, lux
IR 38 kHz
Wiring 2.5 mm2 cable (no earth, suits round and tps)
Operating temperature 0 to 55°C
Material PC (body)
Ingress protection IP54 (with seal installed into roof)
IP65 (with surface or wall mount)
Mounting
(kits sold separately)
Recessed (cut-out Ø 80 mm)
Wall mount kit (mounting centres 85 mm)
Surface mount kit
Rod mount kit
Conduit mount kit (mounting centres 50 – 60 mm)
Compliance standards IEC 61347-2-11
IEC 60669-2-1
CISPR 15
EN 55015
IEC 62386-101
IEC 62386-103

Detection pattern

Range 8 m (mounted at 2.7 m)
Mounting height 2 – 12 m
Alt Text

Accessories range

Order code Description
zc-smart-wall-kit Smart sensor wall mount kit
zc-smart-sm-kit Smart sensor surface mount kit, suitable for surface, rod and conduit mounting
zc-rodmount-wht Rod mount kit, white, to be used with Smart sensor surface mount kit
n /a Conduit mount, not supplied by zencontrol, used with Smart sensor surface mount kit