Sneak a peak now – Look for Wireless in the menu

Launching Q3 in selected regions – Keep an eye out

Standalone smart Microwave sensors 10m

Product range

Order codeDescription
zc-mw-st-daStandalone smart microwave sensor, 10 m
zc-mw-st-da-rStandalone smart microwave sensor, 10 m, with  inbuilt relay
zc-mw-st-da-vfStandalone smart microwave sensor, 10 m, with inbuilt volt-free relay
zc-mw-st-da-2sw-rStandalone smart microwave sensor, 10 m, with relay and two switches
zc-mw-st-da-2sw-vfStandalone smart microwave sensor, 10 m, with inbuilt volt-free relay and two switches


  • Microwave motion sensor
  • Light level measurement
  • Programmable via IR remote
  • Inbuilt IEC62386-101 power supply, 35 mA
  • Inbuilt IEC62386-103 application controller
  • IP65 weatherproof rating with mounting accessory
  • Connect multiple sensors together (max 5)
  • Full control of DALI lighting
Programmable features (IR)

  • Sensor time-out
  • Corridor mode
  • Daylight harvesting
  • Lux level, dusk (if under lux level, activate sensor)
  • Lux level, disable (if over lux level, disable sensor)
Programmable features (switch)

  • Switch type (dimmer, on / off, up / down, colour dimmer, colour warmer, colour cooler)
  • Switch actions (enable / disable sensor, enable / disable lux)
  • Switch override time


Dimensions (mm)


Supply220 – 240 V AC
Supply current< 0.1 A
DALI power supply35 mA 16V (inbuilt)
Relay output
(-r models)
165 A / 20 ms inrush current
492 A / 1.5 ms LED inrush current
10 A capacitive
10 A inductive
10 A resistive
Volt-free output
(-vf models)
0 – 250 VAC / 10 A
0 – 240 VDC / 10 A
SensorsMicrowave, IR, lux
MicrowaveMicrowave 5.8 GHz, 0.2 mW
IR38 kHz
Wiring2.5 mm2 cable (no earth, suits round and tps)
Operating temperature0 to 55°C
MaterialPC (body)
Ingress protectionIP54 (with seal installed into roof)
IP65 (with surface or wall mount)
(kits sold separately)
Recessed (cut-out Ø 80 mm)
Wall mount kit (mounting centres 85 mm)
Surface mount kit
Rod mount kit
Conduit mount kit (mounting centres 50 – 60 mm)
Compliance standardsIEC 61347-2-11
IEC 60669-2-1
EN 55015
IEC 62386-101
IEC 62386-103

Detection pattern

Range10 m (mounted at 2.7 m)
Mounting height2 – 12 m

Accessories range

Order codeDescription
zc-smart-wall-kitSmart sensor wall mount kit
zc-smart-sm-kitSmart sensor surface mount kit, suitable for surface, rod and conduit mounting
zc-rodmount-whtRod mount kit, white, to be used with Smart sensor surface mount kit
n /aConduit mount, not supplied by zencontrol, used with Smart sensor surface mount kit